T MAG-M
Horizontal, sealless Peripheral pump with permanent magnet drive system, no mechanical seal.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
- Max viscosity 200cSt
- Max system pressure:
50 bar (standard)
150 bar(HP Version)
Higher pressure version available on request. - Flow up to 9 mc/h
- Head up to 90 m
- Temperature range:
from -185°F(-120°C) to +662 °F (+350 °C) - Electric motors from 0,55 up to 30 kWAvailable ATEX II – / 2G cbk II C T2 – T5
CT MAG-MS
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal.
The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry. A wide range of pumps covers the different performances.
Epoxy primer and poly-acrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
The hydraulic barrier between two stages is made of a special intermediate bushimg.
“Barrel” construction,with back inserted volute rings, to have the best hydraulic alignment and the longest wear rings life. Available in 2 or 4 stages.
Particular design of the hydraulic, with self balancing impeller to improve the wear ring life.
The range includes the construction with two and four stages, with or without centrifugal inducer to minimize the required NPSH up to 0,6 m, to allows the pumping of condensed and generally all low available NPSH installations.
CF8M or WCB pump casing, cover & impellers High quality casting components.
Other materials:
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.
The rear shell is made of one single piece, no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one.
Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version – providing a safe and efficient solution – system pressure max 150 bar.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
Available in 2 or 4 stages.High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked.
The high performance magnets can be operated at liquid temperatures of up to 662°F (350 °C) without external cooling.
Field assembling of the product lubricated bearing arrangement does not require special tools.
The bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Carbon to allow a dry running situation and PTFEC/G for any applications where the Carbon cannot be used.
The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.
Sealing system with flat gaskets prevents product from leaking to the atmosphere.
– Asbestos free
– PTFE
– Graphoil
– Gylon®
- Max viscosity 200 cSt
- Max system pressure:
50 bar (standard)
150 bar (HP Version)
Higher pressure version available on request. - Flow up to 12 mc/h
- Head up to 500 m
- Temperature range:
from -185 °F(-120°C) to +662 °F (+350°C) - Electric motors:
from 0,55 up to 75 kW - Available ATEX II – / 2G cbk II C T2-T5
Technical Data sheet
T MAG-P
Horizontal, sealless PP and PVDF Peripheral pump with permanent magnet drive system, no mechanical seal.
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal. The hermetic sealless is the best solution for the chemical and pharmaceutical industry. A wide range of pumps covers the different performances. Simple construction combine with high thickness guarantees a long life against the corrosion.
Epoxy primer and polyacrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
Pump casing shall be one single piece, achieved from solid bar, made of very high thickness PP and PVDF to have a good mechanical resistance and a guaranteed long life against the corrosion.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance, PP and PVDF materials.
The sealing system with O-Rings prevents from leaking in the atmosphere. Different materials available:
– EPDM
– VITON®
– FEP
The rear shell is made of thermoplastic materials, as PP GFR or PVDF FCR with zero magnetic
losses. Outside rear shell cover ellipsoidal profile made of fiber reinforced composite material.
High power synchronous magnetic coupling designed by our technical office and with magnetic elements
mechanically locked.
Rare earth guarantees the magnetic-balancing to avoid the thrust bearing wear and the heat generation.
Field assembling of the product lubricated bearing arrangement does not require special tools.
The Shaft / Bearing materials are available in three different configurations to provide the best solution for each application:
Close-coupled drivers are conventional driversmounted directly to pumps frame. No base, coupling or guards are required for this mounting style.
– Threaded BSP (GAS) & NPT
– Universal Flanges that meet both the DIN PN 16 and the ANSI 150.
- Max viscosity: 200 cSt
- Max system pressure: 5 bar
- Flow up: to 13 mc/h
- Head up: to 53 m
- Temperature ratings:
from -22 °F(-30 °C) to +194 °F (+90 °C) - Electric motors:
from 0,18 up to 9,2 kW - Available ATEX II – / 3G cbk II C T5
Technical Data sheet
T ECO MAG-M
Horizontal, sealless Peripheral pump with permanent magnet drive system, no mechanical seal.
Low flow and high heads. Smart construction for quick maintenance and the best value for money are the main characteristics of this pump design.
The rear shell is made of one single piece, no welding, special profile that has been studied to withstand higher pressures than the traditional one.The material is AISI 316; system pressure max 16 bar.
- Max viscosity 200cSt
- Max system pressure 16 bar
- Flow up to 1,5 mc/h
- Head up to 85 m
- Temperature range:
from -185 °F (-120°C) to +662 °F (+350 °C) - Electric motors:
from 0,55 up to 2,2 kW - Available ATEX II – / 2G cbk II C T2- T5
