.
  • Flexible impeller pump, self-priming up to 3 m
  • Broad range of applications (clear liquids, viscous liquids, foodstuffs, delicate liquids, products with solids, etc.)
  • Impeller with flexible blades made from Nitrile or EPDM
  • Very easy to disassemble, clean and maintain (joined using a clamp)
  • Fully reversible thanks to its symmetrical and adjustable body
  • Compact and transportable size
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, SMS, flanges, etc. optional)
  • Internal and external polished finish
  • Flexible impeller pump, self-priming up to 3 m
  • Broad range of applications (clear liquids, viscous liquids, foodstuffs, delicate liquids, products with solids, etc.)
  • Impeller with flexible blades made from Nitrile or EPDM
  • Very easy to disassemble, clean and maintain (joined using a clamp)
  • Fully reversible thanks to its symmetrical and adjustable body
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, SMS, flanges, etc. optional)
  • Internal and external polished finish
  • Bare shaft construction (supported by bearings and without a motor)
Capacity
20m³/hr
Pressure
3bar
Viscosity
5,000cPs
Temperature
70°C
Solid
0mm

Basic Specification
Capacity Up to 20 m³/hr
Pressure 3 bar
Temperature -15  to 70˚C
Speed  700 / 1,000 / 1,500 rpm
Power  0.37 – 4 kw
Self-priming  up to 5 m.

Composition
Wetted Part AISI316L
Impeller Santoprene
Special impeller Hypalon / EDPM / NBR
Seal Single mechanical seal
Connection DIN 11851

Basic Specification

  • 20m³/hr
  • 3bar
  • 5,000cPs
  • 70°C
  • 0mm
Ask for more detail.
close slider







[recaptcha]