.
  • Centrifugal pump for clear liquids, self-priming up to 3 m
  • Self-priming stamped body (with priming chamber)
  • Specially designed for operating with liquids that contain air or gases and without losing pumping capacity (e.g., CIP return)
  • Joined together with screwed ring
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Accessed from above for manual priming, with inferior drain port
  • Brushed matt finish and stainless steel baseplate
  • Centrifugal pump for clear liquids, self-priming up to 3 m
  • Self-priming stamped body (with priming chamber)
  • Specially designed for operating with liquids that contain air or gases and without losing pumping capacity (e.g., CIP return)
  • Joined together with screwed ring
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Accessed from above for manual priming, with inferior drain port
  • Polished external finish, stainless steel motor shroud and adjustable tripod
Capacity
100m³/hr
Pressure
7bar
Viscosity
100cPs
Temperature
130°C
Solid
0mm

Basic Specification
Capacity Up to 100 m³/hr
Pressure 7 bar
Temperature -25  to 130˚C
Speed 2,900 rpm
Power  2.2 – 22 kw

Composition
Wetted Part AISI316L
Self-priming up to 3 m.
Thickness 3 mm.
Seal Single mechanical seal
Connection GAS / DIN 11851

Basic Specification

  • 100m³/hr
  • 7bar
  • 100cPs
  • 130°C
  • 0mm
Ask for more detail.
close slider







[recaptcha]