.
  • Side channel pump for clear liquids, self-priming up to 5 m
  • Body-flange and impeller produced using microfusion techniques
  • Thanks to its tight fit it has a large negative suction power and can operate with liquids which contain air or gases without losing pumping capacity (e.g., CIP return)
  • Symmetrical design, so it is completely reversible
  • Joined with screws
  • Single internal mechanical seal
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: inferior drain port, special dimensions, etc.
  • Brushed matt finish and stainless steel baseplate
  • Side channel pump for clear liquids, self-priming up to 5 m
  • Body-flange and impeller produced using microfusion techniques
  • Thanks to its tight fit it has a large negative suction power and can operate with liquids which contain air or gases without losing pumping capacity (e.g., CIP return)
  • Symmetrical design, so it is completely reversible
  • Joined with a clamp or screws
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: inferior drain port, special dimensions, etc.
  • Polished external finish, stainless steel motor shroud and adjustable tripod
Capacity
50m³/hr
Pressure
6bar
Viscosity
100cPs
Temperature
130°C
Solid
0mm

Basic Specification
Capacity Up to 50 m³/hr
Pressure 6 bar
Temperature -25  to 130˚C
Speed 1,450 rpm
Power 0.75 – 15 kw
Reversible Yes

Composition
Wetted Part AISI316L
Self-priming up to 5 m.
Seal Single mechanical seal
Connection GAS / DIN 11851

Basic Specification

  • 50m³/hr
  • 6bar
  • 100cPs
  • 130°C
  • 0mm
Ask for more detail.
close slider







[recaptcha]