.
  • Centrifugal pump for solid-free liquids under load
  • Economical and low-maintenance design
  • All parts stamped: body, cover, flange and impeller are all cold-stamped
  • Minimum thickness 2 mm
  • High hydraulic output: central outlet, side diffuser and an open impeller
  • Attached with screws
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Centrifugal pump for solid-free liquids under load
  • Economical and low-maintenance design
  • All parts stamped: body, cover, flange and impeller are all cold-stamped
  • Minimum thickness 2 mm
  • High hydraulic output: central outlet, side diffuser and an open impeller
  • Attached with screws
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Stainless steel motor shroud and baseplate
  • Centrifugal pump for solid-free liquids under load
  • Cold-stamped body, cover and flange
  • Joined together with a clamp
  • Semi-open impeller obtained by microfusion
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Centrifugal pump for solid-free liquids under load
  • Cold-stamped body, cover and flange
  • Joined together with a clamp
  • Semi-open impeller obtained by microfusion
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Stainless steel motor shroud and baseplate
Capacity
60m³/hr
Pressure
6bar
Viscosity
300cPs
Temperature
100°C
Solid
0mm

Basic Specification
Capacity Up to 60 m³/hr.
Pressure 6 bar
Temperature -15 to 100˚C
Speed 1,450 – 2,900 rpm
Power 0.37 – 7.5 kw

Composition
Wetted Part AISI316L
Thickness 2-3 mm.
Seal Single/Double mechanical seal.
Connection GAS / DIN 1151

Basic Specification

  • 60m³/hr
  • 6bar
  • 300cPs
  • 100°C
  • 0mm
Ask for more detail.
close slider







[recaptcha]