.

CN SEAL-M ISO2858–5199

CN SEAL-M SERIES
The stuffi ng box dimension allows the interchangeability between standard mechanical seals and packing. The standard construction uses mechanicalseal according to DIN. Possiblity to insert many different kind of mechanical seal. Standard mechanical seal fl ushing with internal recirculation from pressure side to seal chamber. Available different kind of fl ushing line like in an execution similar to API 682 standard.

 

Operating limits


– Maximum capacity up to 0.1-1000 m3/h

– Differential head up to 225 m (740 ft)
– Temperature range:
-30°C (-22°F) to 200°C (+390°F);
– System pressure: max. 16 bar (290 psi)
– Capability of handling solids depending on shape, hardness: consult factory

CV MAG-P

The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal.
The hermetic sealless is the best solution for the chemical and pharmaceutical industry.
A wide range of pumps covers the different performances. The simple construction combined with an high thickness guarantees a long life against the corrosion.Pump casing shall be one single piece, achieved from solid bar, made of very high thickness PP and PVDF to have a good mechanical resistance and a guaranteed long life against the corrosion.

The sealing system with O-Rings prevents from leaking in the atmosphere.

Different materials are available:
– EPDM
– VITON®
Epoxy primer and polyacrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
Strong carbon Steel CNC machined construction, protected by an high tickness thermoplastic shell, to reach the best compromise between mechanical and corrosion resistance.ù
Special PVDF FCR screws for external parts in contact with the liquid. High thickness thermoplastic barrier to avoid any possibility of corrosion.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance, PP and PVDF materials.
– Standard version
– CFR version
Pump casing shall be one single piece, achieved from solid bar, made of very high thickness PP and PVDF to have a good mechanical resistance and a guaranteed long life against the corrosion.
Ball bearings sealed for life (Lh=30000 hours) to support the shaft line, smart additional modules that allowes arrive up to 7 m depth.
The rear shell is made of thermoplastic materials, as PP GFR or PVDF FCR with zero magnetic losses.
Outside rear shell cover ellipsoidal profile made of fiber reinforced.
High power synchronous magnetic coupling designed by our Technical Office and with magnetic elements mechanically locked.
Rare earth guarantees the magnetic-balancing to avoid the thrust bearing wear and the heat generation.
Field assembling of the product lubricated bearing arrangement does not require special tools.

The Shaft / Bearing materials are available in three different configurations to provide the best solution for each application:

– PTFEC – ALLUMINA 99,7% (standard)
– CARBON – ALLUMINA 99,7%
– Silicon Carbide (SSIC) – Silicon Carbide (SSIC)
Operating limits
  • Max viscosity: 200 cSt
  • Flow up: to 140 mc/h
  • Head up:to 44 m
  • Temperature range:
    from -22 °F (-30 °C) to +194 °F (+90 °C)
  • Electric motors:
    from 1,5 up to 18,5 kW
  • Lenght up: to 7 m

Technical Data sheet

CM MAG-P

Horizontal, sealless PP and PVDF centrifugal pump with permanent magnet drive system, no mechanical seal.

The separation of liquid chamber/ atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal.

The hermetic sealless is the best solution for the chemical and pharmaceutical industry.
A wide range of pumps covers the different performances.

The simple construction combined with high thickness at interesting prices.

Making a comparison between this range of pumps and the other two M PUMPS series C MAG-P and C MAG-PL, the correct definition becomes few components (extremely easy maintenance), competitive prices, guaranteed chemical compatibility.

Pump casing shall be one single piece, injection moulded designs, made of GFR PP and CFR PVDF.

RWP QUICK CHANGE CARTRIDGE KIT

to guarantee an easy and fast maintenance, materials PP and PVDF.

The sealing system with O-Rings prevents from leaking in the atmosphere.

Different materials available:
– EPDM
– VITON®The rear shell is made of thermoplastic materials, ellipsoidal profile, zero magnetic losses, GFR PP or GFR PVDF materials.High power synchronous magnetic coupling designed by our Technical Office and with magnetic elements mechanically locked.
Rare earth guarantee the magnetic balancing to avoid the thrust bearings wear and the heat generation.

Field assembling of the product lubricated bearing arrangement does not require special tools.
The Shaft / Bearing materials are available in two different configurations to provide the best solution for each application:

– PTFEC – ALLUMINA 99,7% (standard)
– CARBON – ALLUMINA 99,7%
Pump construction and Operative limits
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.
Connection:
  • Threaded BSP (GAS) & NPT.
  • Max viscosity 200cSt
  • Max system pressure 6 bar
  • Flow up to 35 mc/h
  • Head up to 23 m
  • Temperature range:
    from -4°F (-20°C) to +176°F (+80°C)
  • Electric motors:
    from 0,12 up to 4 kW

Technical Data sheet

CL MAG-M ISO2858-5199

HORIZONTAL SEALLESS PFA LINED CENTRIFUGAL MAGNETIC DRIVE PUMPS ACC. TO ISO 2858 -ISO 5199

Ideal for pump highly corrosive, difficult to seal and high purity chemicals

FEATURES & BENEFITS

  • Wetted parts materials FDA certificate
  • Inert to most of fluids
  • High permeation resistance
  • Casing and impeller magnet are lined with pure PFA, and achieved by compression transfer moulding
  • Containment shell made in PTFE with external reinforce of carbon fiber composite
  • Solid handling capability
  • Axially thrust-optimized rotating unit by back vanes
  • Strong SSiC bushings fully spaced
  • Non-cantilevered design, thus no shaft deflection
  • High strenght metallic lined rotating shaft with silicon carbide sleeves
Operating Range:
  • Max viscosity 200cSt
  • Max system pressure 20 BAR
  • Flow up to 90 m3/h
  • Head up to 63 m
  • Temperature Range from -30 to +150°C
    (-22°F to +300°F)
  • Electric motors from 1,5 to 30 KW
  • ATEX II – /2G cbk II C T5

Technical Data sheet

Capacity
1,000m³/hr
Pressure
22bar
Viscosity
200cPs
Temperature
200°C
Solid
5mm

Basic Specification
Capacity 0.1 – 1,000 m³/hr
Pressure 22 bar
Temperature -30  to 200˚C
Solid Handling Contact us
According to ISO2858 – 5199

Composition
Casing Cast iron / AISI316L
Impeller Cast iron / AISI316L
Seal Mechanical Seal

Basic Specification

  • 1,000m³/hr
  • 22bar
  • 200cPs
  • 200°C
  • 5mm
Ask for more detail.
close slider