.
  • Centrifugal pump for liquids with or without suspended solids under load
  • High degree of mechanical robustness and chemical resistance (widely introduced across the market for 40 years)
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, enlarged clamp for high temperatures, special dimensions, etc.
  • Brushed matt finish and stainless steel baseplate
  • Sanitary centrifugal pump for liquids under load
  • Robust design for use with foodstuffs, internally and externally polished finish (widely introduced across the market for 40 years)
  • Cold-stamped body, cover and flange
  • Joined together with a quick-release clamp, requiring no tools, to facilitate rapid cleaning
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, etc.)
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, enlarged clamp for high temperatures, special dimensions, etc.
  • Stainless steel motor shroud and adjustable tripod
  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, etc. optional)
  • Brushed matt (ELNOX-R) or gloss (ELNOX-S) finish
  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • DIN 2633 flange connections
  • Brushed matt finish
Capacity
200m³/hr
Pressure
8bar
Viscosity
500cPs
Temperature
180°C
Solid
0mm

Basic Specification
Capacity Up to 200 m³/hr
Pressure 8 bar
Temperature -25 180˚C
Speed 1,450 – 2,900 rpm
Power 0.37 – 22 kw

Composition
Wetted Part AISI316L
Thickness 3 8 mm.
Seal Single / Double Mechanical Seal
Connection GAS / DIN 11851

Basic Specification

  • 200m³/hr
  • 8bar
  • 500cPs
  • 180°C
  • 0mm
Ask for more detail.
close slider







[recaptcha]